Shure U2/Beta 58A Wireless Handheld
- Manufacturer: Shure
- Model #: U2/Beta 58A
- Categories: Wireless Microphones
The Shure U2/Beta 58A wireless handheld is a very rugged item. With it’s all metal housing, the two AA batteries will produce a solid 12-hour transmission period. The LCD displays shows the group/channel setting, the five segment battery fuel gauge, and if the unit is power / frequency locked. The 1/4 wave helical antenna produces great range. The main power switch is located right by the antenna, making it most impossible to bump the switch by accident. We have had great success with these microphones, and thus we continue to support Shure Wireless Solutions.
Please note for any wireless handheld system to function, you require 2 items, a receiver set to the frequency the the handheld is transmitting, and this wireless microphone.
Of coarse when this system is rented from us, we will ensure it is ready for your use with two simple connections, one into a wall plug for power, and the other connection into your sound system with a simple microphone cable. If you require a sound system – we are pleased to assist you with selecting only the required items for your sized venue also.
RF Carrier Frequency Range
554–862 MHz, depending on region
Working Range
152.4 m (500 ft.) minimum, under typical conditions; 487.6 m (1600 ft.) line of sight - NOTE: Actual working range depends on RF signal absorption, reflection and interference
Audio Frequency Response
50–15,000 Hz, +2 dB. - NOTE: Overall system frequency response depends on the microphone element
Gain Adjustment Range
0 to 26 dB
Modulation
+10kHz to +100kHz deviation, depending on region; compressor-expander system with pre- and de-emphasis
RF Power Output
10 mW maximum
Dynamic Range
>102 dB or >110dB, depending on region; A-weighted
Image Rejection
90 dB typical
Spurious Rejection
75 dB typical
Ultimate Quieting
(ref. 45 kHz deviation)
>100 dB, A-weighted
Audio Polarity
Positive pressure on microphone diaphragm
System Distortion
(ref. +45 kHz deviation, 1 kHz modulation)
0.3% Total Harmonic Distortion typical
Power Requirements
1.5V AA alkaline battery; Nicad optional
Battery Life
(Typical)
12 hours
Operating Temperature Range
–20° to 50° C (–4° to 122° F) - NOTE: Battery characteristics may limit this range
Overall Dimensions
232 mm L x 53 mm Dia. (9.28 x 2.12 in.)
Net Weight
330 g (11.6 oz.) without battery
Permalink — Posted by David Neher on Jan. 26 at 12:36 AM
Previous entry: Shure U1 Body Pack
Next entry: Shure U4D Receiver
